Single Pump Dual Temperature 3000W Laser Cutting Chiller HL-3000-QG2/2
3000W Fiber LaserDual Temperature8.7 kW Cooling
Product Summary — The HL-3000-QG2/2 is a dual temperature laser cutting chiller built for 3000W fiber laser cutting machines. A single pump feeds the dual temperature circuit, delivering 8.7 kW of cooling capacity with 3.5 kW rated power on a 1P 220V/50Hz supply. Water temperature is controlled within 22–29.5°C, with standard (±3°C) or high precision (±1°C) regulation and automatic switching between the two modes. The intelligent digital display controller runs the unit fully automatically, and alarm outputs for low flow, high water temperature, low temperature and low water level keep the laser source protected during continuous production.
HL-3000-QG2/2 dual temperature laser cutting chiller
8.7 kWCooling capacity
3.5 kWRated power
±1°C / ±3°CPrecision modes
0.63 kWWater pump
Key Features
- Single-pump dual-temperature designOne 0.63 kW pump serves the dual temperature circuit, keeping the cabinet compact, the operation simple and the cooling performance stable on the production floor.
- Matched to 3000W fiber lasers8.7 kW cooling capacity with 3.5 kW rated power supports 3000W fiber laser cutting machines, so the laser source and optics stay inside their working temperature window.
- Two precision modesStandard ±3°C or high precision ±1°C regulation, with automatic switching between high-precision and standard-precision modes and a 22–29.5°C water temperature control range.
- Water circuit filtrationA filter inside the water circulation system keeps the coolant clean, protecting the pump and the cooling passages during long production runs.
- Alarm outputs and protectionsSignal outputs for low flow, high water temperature and low temperature, plus a low-water-level alarm, compressor time-delay protection and equipment overheat protection.
- Intelligent automatic controlThe digital display controller runs the chiller fully automatically, with intelligent switching to a winter anti-freeze mode and energy-saving cooling control in summer.
Technical Specifications
| Parameter | Specification |
|---|
| Model | HL-3000-QG2/2 |
| Type | Single-pump dual temperature fiber laser chiller |
| Cooling capacity | 8.7 kW |
| Rated power | 3.5 kW |
| Voltage and frequency | 1P 220V / 50Hz |
| Water temperature control range | 22–29.5°C |
| Temperature control accuracy | Standard ±3°C / High precision ±1°C |
| Pump power | 0.63 kW |
| Recommended application | 3000W fiber laser cutting machine |
| Structure materials | Cast iron, stainless steel SS304 |
| Water circuit filtration | Filter included in the water circulation system |
| Alarm signal outputs | Low flow, high water temperature, low temperature, low water level |
| Protection functions | Compressor time-delay protection, equipment overheat protection, winter anti-freeze mode |
| Control | Intelligent digital display controller, fully automatic operation |
Models and Options
The HL-3000-QG2/2 is supplied in the 3000W fiber laser cutting configuration. Buyers select the temperature regulation mode at ordering: standard precision (±3°C) or high precision (±1°C); the controller supports automatic switching between high-precision and standard-precision modes during operation.
The QG2/2 and QGS families are listed in the manufacturer CE Certificate of Conformity (TÜV Rheinland LGA Products GmbH, No. AM 50662218 0001, EC Directive 2006/42/EC) under type designations including HL-1000-QG2/2, HL-1500-QG2/2, HL-2000-QG2/2, HL-4000-QG2/2, HL-8000-QG2/2, HL-15000-QG2/2, HL-30000-QG2/2, HL-50000-QG2/2, HL-80000-QG2/2, HL-1500-QGS, HL-4000-QGS, HL-6000-QGS and HL-12000-QGS. Specifications differ by model; confirm the datasheet for the capacity you need.
Materials and Structure
Wetted and structural materials
Cast iron and stainless steel SS304 are used in the chiller construction. The water circulation system incorporates a filter to keep the coolant clean before it returns to the laser and optics circuit.
Cooling and control layout
A single pump serves both temperature circuits. The intelligent digital display controller manages temperature regulation, alarm outputs and protection logic, including compressor time-delay protection and a summer cooling / winter anti-freeze operating mode.
Cabinet and intelligent digital controller
Compact dual temperature chiller body
Applications
The HL-3000-QG2/2 is used for laser cooling on 3000W fiber laser cutting machines, and within laser processing and plastic molding machine installations where a compact water chiller is required. It removes the heat generated by the laser source and related equipment, stabilises the cooling temperature and supports processing performance and operational reliability under continuous laser operation and changing thermal loads.
Fiber laser cuttingLaser processingPlastic molding machinesClosed-loop water cooling
Customization
Order configuration covers the temperature precision mode (standard ±3°C or high precision ±1°C). Because the chiller must match laser power, heat load, flow, pressure and ambient conditions, buyers are asked to confirm their laser source, working environment and water quality requirements before shipment; final configuration is confirmed against the model datasheet. The manufacturer is certified to ISO 9001 for the design, production, sales and after-sales service of water chillers up to 120 kW (certificate 02125Q11006R4M, HuaXin Certification Center, valid to 26 July 2028).
Field Experience
Chillers from this manufacturer are used for laser cooling of laser cutting, welding and engraving equipment, with reported service durations of 5–10 years in customer installations and a focus on stable performance, energy saving and equipment-life support. Products have been successfully matched with well-known domestic laser companies such as Senfeng, Bodor and HG, and are exported to markets including Germany, Russia, India, Turkey, Vietnam, Poland, France, Italy, the United States, Brazil, Mexico and the Middle East.
FAQ
Which laser power is the HL-3000-QG2/2 designed for?
It is specified for 3000W fiber laser cutting machines, with a cooling capacity of 8.7 kW, a rated power of 3.5 kW and a 0.63 kW water pump.
What temperature accuracy can I get?
The water temperature control range is 22–29.5°C. Control accuracy is standard ±3°C or high precision ±1°C, and the controller switches automatically between high-precision and standard-precision modes.
What power supply is required?
1P 220V / 50Hz, with a rated power of 3.5 kW. Confirm the electrical supply at your site matches this before installation.
Which alarms and protections are included?
Alarm signal outputs are provided for low flow, high water temperature, low temperature and low water level. The unit also includes compressor time-delay protection, equipment overheat protection and intelligent winter anti-freeze mode switching.
How is water cleanliness maintained?
The water circulation system includes a filter that keeps the coolant clean. The manufacturer notes that water quality, filtration, regular water replacement and antifreeze protection should be considered in operation.
What pump is used?
A 0.63 kW water pump, designed for low noise, high head, high flow rate and long service life with a compact footprint.
Is the chiller certified?
The manufacturer holds ISO 9001 certification for the design, production, sales and after-sales service of water chillers up to 120 kW (No. 02125Q11006R4M, GB/T 19001-2016 / ISO 9001:2015, valid to 26 July 2028). A CE Certificate of Conformity under EC Directive 2006/42/EC (TÜV Rheinland, No. AM 50662218 0001) lists QG2/2 and QGS series type designations.
How is the unit operated?
Operation is fully automatic through an intelligent digital display controller. The same controller manages precise temperature regulation, alarm outputs and the winter anti-freeze / summer cooling operating modes.
Inquiry Information
For pricing, lead time and configuration confirmation of the HL-3000-QG2/2 laser cutting chiller, contact the manufacturer directly with your laser power, site power supply and cooling requirements.
- Company: Wuhan Hanli Refrigeration Technology Co., Ltd (founded 1998)
- Contact: Bedy Liu
- Email: hanli-laserchiller@hanlizl.com
- Tel / WhatsApp: +86 13682641130
- Address: No 1, Xingfuyuan 2nd Road, Shamao Street, Hannan District, Wuhan, Hubei, China
- Website: www.hanlichiller.com
Image Filename and Alt Suggestions
- laser-cutting-chiller-hl-3000-qg2-2-dual-temperature-front.png — Alt: HL-3000-QG2/2 dual temperature laser cutting chiller front view
- laser-cutting-chiller-hl-3000-qg2-2-control-panel.png — Alt: HL-3000-QG2/2 laser chiller cabinet and control panel detail
- laser-cutting-chiller-hl-3000-qg2-2-side-view.png — Alt: HL-3000-QG2/2 dual temperature laser chiller side view
✓ Verified Elite Supplier